B&H PROJECT KNOWLEDGE
Practical guidance for the decisions behind a commercial rollout, from reading a floor plan and selecting a frame system to preparing an international procurement brief.
THE RESOURCE LIBRARY
20 resources
Showing 20 resources.
OEM/ODM & Private Label
Quick Answer Your standing desk bulk order should follow the approved sample and any later changes agreed in writing. A practical standing desk sample approval checklist covers three things: the final product version, the specifications that must remain consistent, and order details the sample did not cover. Once those are agreed, reference them together in…
Procurement, Logistics & Delivery
Quick Answer Here’s how to write a standing desk RFQ: specify the model number or product description, quantity, preferred trade term and shipping destination, then add your expected arrival date. Add your expected arrival date when you have one. For example, “100 two-leg, dual-motor standing desk frames, CIF Port of Los Angeles, with arrival requested…
OEM/ODM & Private Label
Quick Answer This OEM standing desk frame case study documents B&H Ergonomics’ 400-set Goodmans order, including custom cartons, pre-packing component inspection, and post-packing AQL sampling. Inspectors recorded four minor paint defects in a 50-unit sample. B&H replaced the affected components before shipment. Last Updated: August 18, 2026 | Author: William | Estimated Reading Time: 6…
Commercial Project Planning
A corner desk for two monitors needs more than two screens and a desktop that fits the room. You also need enough depth for the viewing distance, clear space for the dual-monitor arm, room to pull out the chair, and cable slack for the full sitting-to-standing movement. Measure those conditions before choosing the left or…
Frame & Configuration Selection
Quick Answer For importers and dealers with an efficient desktop supply chain, buying standing desk frames separately is worth comparing first. For e-commerce sellers building a value-focused range, a single-motor frame with a non-solid-wood split desktop packed together can offer better overall economics through transport and final delivery savings. For solid wood product lines, B&H…
Frame & Configuration Selection
Quick Answer Choosing a 2 stage vs 3 stage standing desk comes down to the stroke you need and the price difference. Our dual-motor desks have a 500 mm stroke with two-stage legs and a 650 mm stroke with three-stage legs. Two-stage legs cost less because each leg has one fewer section. Choose them if…
Frame & Configuration Selection
Quick Answer How much weight can a standing desk hold? The answer depends on its rated lifting capacity. At B&H Ergonomics, our standard single-motor configuration lifts 80 kg (176 lb), a reinforced custom single-motor configuration lifts 100 kg (220 lb), and our standard dual-motor configuration lifts 130 kg (287 lb). These are dynamic lifting capacities…
Frame & Configuration Selection
Quick Answer Checking solid wood desktop weight for standing desk compatibility starts with the board’s actual weight plus the equipment it will carry. For a 180 × 70 cm solid-wood desktop, B&H Ergonomics recommends a dual-motor frame with three-stage lifting columns. Start by recording the board’s thickness and actual weight. Add approximately 15 kg as…
Frame & Configuration Selection
Quick Answer When choosing a manual vs electric standing desk, we recommend electric adjustment wherever reliable power is available. At B&H Ergonomics, we still offer hand-crank desks, but very few of our customers choose them now. The saving over our economy single-motor option is small, while adjustment takes much longer and requires turning the handle…
Frame & Configuration Selection
Quick Answer For a single motor vs dual motor standing desk decision, B&H Ergonomics recommends a single-motor model when the budget is tight and its height range and load rating fit the workstation. If you can increase the budget, or are buying with five years or more of use in mind, our recommendation is a…
Commercial Project Planning
Quick Answer Cable management for sit stand desk setups starts with identifying which parts move and which stay fixed. Collect equipment leads in a tray, then use a flexible cable spine wherever the route connects a moving desktop to a fixed point. Check that the loose cables can reach before raising the desk. Organize them…
Frame & Configuration Selection
Quick Answer A standing desk for short person needs to work with the chair and input devices at its seated setting. Check whether you can sit against the backrest, support your feet, reach the keyboard without leaning and leave room for your thighs. Raising the chair with a footrest can make an existing desk usable.…
FROM RESEARCH TO PROJECT REVIEW
