BH-T33RS / L-SHAPED WORKSTATION
A three-motor frame for the L-shaped workstation that fits the corner.
BH-T33RS is a three-motor, three-leg, three-stage standing desk frame for one person working across two connected desktop wings. It suits private offices, corner workstations, project rooms, and premium dealer programs. Configure the frame at 90, 120, 180 degrees, or with a Free Angle pivot, then confirm each side width, controls, finish, and electrical setup.
Mixed D23RS, T33RS, and Q43RS project orders are reviewed from 40 workstations.
PRODUCT AND LIFT TEST
Review the visible profile and the lift route around two connected wings.
Select the column profile used in the project. Rectangular and round columns retain the corresponding T33RS performance specifications; the selection changes the visible cross-section, not the L-shaped workstation route.
INTERNAL LIFT TEST
Show the frame under the same configuration being quoted.
The completed product page should show the real T33RS raising and lowering with the applicable column profile. Internal cycle-test evidence is described separately below.
Test condition
220 kg internal cycle test
Recorded cycles
15,000+ cycles
Public load
190 kg dynamic load
INTERNAL LIFT TEST
PROJECT FIT
Best where one user needs two connected work surfaces.
The T33RS is the direct route for an independently adjustable L-shaped workstation. It suits private offices, corner planning, project rooms, executive work areas, and dealer ranges that need a clean two-wing desk geometry.
Review commercial workstation planning
Corner and private-office layouts
One person, two connected desktop wings, and a three-leg lift base arranged around the room geometry.
Two-wing load and clearances
Include both desktop panels, monitor arms, computers, cable trays, corner joinery, and the planned moving load before configuration.
Open-plan facing pairs
Use Q43RS for two independently adjustable users facing each other, or D23RS for a standard single workstation.
DIMENSIONS AND DESKTOP REVIEW
Set both frame widths before locking the desktop corner.
Each T33RS side adjusts from 1050-1800 mm (41.3-70.9 in). Review both desktop wings together with the corner join, equipment, accessory plan, and room clearances.
FRAME ANGLE OPTIONS
Match the two-wing frame to the room geometry.
Choose the existing 90°, 120°, or 180° fixed-angle route when the project layout is already confirmed. Use the movable Free Angle version when the final geometry is still undecided or needs on-site flexibility. Free Angle is priced slightly above the fixed-angle versions.
Right-angle corner90° FRAME
A fixed right-angle route for conventional corners and L-shaped private-office layouts.
Primary desktop / 2 legsSide desktop / 1 leg1050-1800 mm / 41.3-70.9 in each side3-stage lift
Both adjustable sides use the same review envelope; final lengths are set to the corner and room plan.
Review the two panels, corner connection, equipment, monitor arms, cable accessories, and planned moving load together.
Confirm the final height family, desktop thickness, and floor conditions with the destination brief.
Three synchronized lifting legs support the connected L-shaped desktop route. Rectangular and Round Column variants are available.
Use a fixed angle after the layout is confirmed. Free Angle suits projects where the geometry is still undecided and is priced slightly higher. Final joint hardware, desktop shape, operating range, and clearances are confirmed with the project.
CONTROLS AND DESTINATION POWER
Configure the hand control around the users and electrical market.
The T33RS can be specified with the user controls needed for the project. The final control panel, voltage, frequency, plug standard, and cable route are confirmed with the destination and order configuration.
Bluetooth is not included in the standard T33RS configuration. It is available only as a custom option.
Up / down operation
Base control for an independently adjustable desk.
Memory settings
Available according to the selected hand control.
Child lock and anti-collision
Selectable functions for the configured control system.
USB charging and sit reminder
Optional features that should be matched to the selected hand control.
WORKSTATION SYSTEM
Use the frame as the base of a complete workstation plan.
The T33RS specifies the lift base for two connected desktop wings. Cable routing, power access, monitor support, finish, and packaging make the finished desk suitable for the project.
01
Cable trays and spines
Plan cable containment, vertical cable routing, and repeated desk runs around the floor layout.
Project accessories ->02Desktop power and monitor support
Review power/data openings and monitor-arm compatibility with the desktop and equipment plan.
Workstation accessories ->03Finish and hardware
Black, white, and silver gray are standard. Eligible RAL colors and structural changes require project review.
Custom frame options ->04Packaging and branding
Frame labels, manuals, barcodes, and printed cartons are evaluated for eligible OEM and dealer orders.
OEM packaging ->TESTING, PACKING, AND DELIVERY
Use the technical details to reduce L-shaped quoting risk.
Internal testing and packing data help establish the configured T33RS route. They are not a substitute for the final approved specification, packaging plan, or commercial quotation.
Internal cycle test load with 15,000+ recorded cycles.
Rated dynamic load. Review both desktop wings, equipment, accessories, and planned moving load together.
Gross weight: 42.5 kg / 93.7 lb per frame carton.
Delivery terms, destination eligibility, timing, and scope are confirmed in the project quotation.
Warranty: Five-year frame warranty and three years for motors, control boxes, and hand controls. Final terms are confirmed in the quotation.
Review manufacturing and QA evidence
BEFORE REQUESTING A QUOTE
Bring the details that define the working desk, not only the frame model.
Send the available project information. A floor plan, workstation schedule, or two-wing desktop drawing helps verify the T33RS configuration before the quote is finalized.
- 01
Quantity, project destination, target delivery date, and preferred delivery term.
- 02
Preferred 90°, 120°, 180°, or Free Angle frame, column profile, each side width, both desktop dimensions, corner or pivot joint, and planned equipment. State whether the geometry is confirmed or still undecided.
- 03
Finish, hand-control functions, voltage, frequency, plug standard, and cable requirements.
- 04
Accessory, label, manual, carton, or private-label packaging requirements when applicable.
BUYER QUESTIONS
BH-T33RS FAQ
These answers apply to the current T33RS product route. Project-specific dimensions, accessories, commercial terms, and delivery details are confirmed in the final quotation.
What type of workstation is BH-T33RS designed for?
BH-T33RS is a three-motor, three-leg, three-stage lift base for one independently adjustable L-shaped workstation. It is suited to private offices, corner workstations, project rooms, and repeatable dealer configurations.
Does the round column option change T33RS performance?
No. The 50 x 80 mm (1.97 x 3.15 in) rectangular profile and 70 mm (2.76 in) round profile describe the visible cross-section of the lifting columns. T33RS structure and public performance specifications remain the same; the project quote confirms the chosen profile and configuration.
What desktop size can be used with T33RS?
Each desktop wing up to 2000 x 800 x 25 mm (78.7 x 31.5 x 0.98 in) is recommended for review. The final L-shaped desktop must be checked with both side widths, the corner connection, desktop construction, equipment, monitor arms, cable accessories, and planned moving load.
Which L-frame angles are available for T33RS?
T33RS is available with fixed 90°, 120°, and 180° frame configurations, plus a Free Angle version with a movable pivot. Select a fixed version when the project layout is confirmed. Free Angle is useful while the final geometry remains undecided and is priced slightly higher. Confirm the required orientation, pivot range, joint hardware, desktop shape, equipment layout, and room clearances in the project quotation.
Can the control panel include memory, anti-collision, USB charging, and a sit reminder?
These functions are selectable for the configured T33RS control system. Bluetooth is not included by default and is available only as a custom option. Confirm the required functions, electrical market, and cable plan with the quote request.
What is the T33RS project minimum?
T33RS can be reviewed within a mixed D23RS, T33RS, and Q43RS project order from a total of 40 workstations. The selected model mix, column profile, finish, destination, and custom requirements determine the final quotation review.
READY TO CONFIGURE THE T33RS?
Send the workstation plan, quantity, destination, frame angle, and preferred column profile.
B&H Ergonomics replies within 48 business hours with the next specification or quotation questions.