3 Keys to Manufacture Best Dual Motor Standing Desk

There are a lot of factors to consider when manufacturing the best dual motor standing desk.

At B&H Ergonomics, we believe that quality is the most important factor of all.

We use only the highest quality raw materials in our frames, and we employ advanced manufacturing techniques to ensure precise results. In addition, we perform rigorous inspections on all of our products before they leave our factory.

Table of Content:

1. Using Good Raw Material for Dual Motor Standing Desk

2. Using Advanced Machine to Produce

3. Strict Inspection

Best Dual Motor Standing Desk

1. Using Good Raw Material for Dual Motor Standing Desk

Although the raw material price is keeping increased due to many reasons, none of us will consider using cheaper raw materials to get an advantage in price.

All B&H Ergonomics members believe the best dual standing desk frame must be from the best material.

2. Using Advanced Machines to Produce

B&H Ergonomics will use the most advanced laser cutting machine to process the tube and make standing desk leg parts.

Our advanced machine hand robots help us achieve incredible stabile but also high-quality production line.

3. Strict Inspection

All standing desk frame parts are 100% tested before being packaged first.

dual motor standing desk running test

  1. 100%Visual check

1m distance with illuminant. 0~50cm between product and eye or normal use distance then Inspect each. No critical can be allowed, Minor should within AQL standard.

  1. Assembly and Function check

Easy to assemble according to the manual, conduct the check as per any information printed on manual.

No critical can be allowed and minors should be within AQL standard.

  1. Running test

One cycle of going up and down without load in auto mode and one cycle with rated load.

Another cycle with 110% rated. All running speed and stop position accuracy shall conform as spec.

  1. Fatigue test

20 times for each button, plug, and switch without any damage or block.

  1. Noise check

Test noise by sound level test at 1 meter away from the desk when running and it should be within 50 dB.

  1. Others

There are many other tests such as Stability test, Spark check, Smell check, Rub check, Pull test, and so on.

If you have any questions about our manufacturing process or our products, please don’t hesitate to contact us.

We would be more than happy to answer any of your questions!

quality is the most important factor when it comes to manufacturing the best dual motor standing desk frame.

We want to make sure that you are completely satisfied with your dual motor standing desk!

Leave a Reply

Your email address will not be published. Required fields are marked *